N533DS-CC1311R3 Power Amplifier Module, +30dBm
N533DS module up to 30dBm output power, down to - 113dbm sensitivity at 50Kbps. AT command support.
Radio module based CC1311R3, power amplifier and LNA. Designed for 169M, 433M, 868M and 915MHz band.
N533DS module up to 30dBm output power, down to - 113dbm sensitivity at 50Kbps. AT command support.
N533DS integrated TI CC1311 chip, which is suitable for 169M/ 433M/ 868MHz / 915MHz band. CC1311 module has the characteristics of low cost, low power consumption and small size. The module is designed with 4-layer board, with excellent impedance matching and anti-interference. The module is mainly for Internet of things, intelligent home, wireless meter reading, scientific research and medical treatment, and medium and long-distance wireless communication equipment. CC1311 module leads all pins out for secondary development.
RF Interface | Parameter | Introduce |
Frequency | 169M, 433M, 860MHz, 960MHz | Support ISM |
Output Power | +30dBm | The maximum power 1000mW |
Sensitivity | -112dBm | - |
Symbol Rate | 0.3-4000kbps | Software programming control |
Deviation | +/-10kHz | Antenna interface |
Distance | 8000m | In clear and open environment, the antenna gain is 3 dBi, the height above the ground is 2.5 meters, and the air speed is 1.2 kbps. |
Hardware parameters | Value | Remarks |
Module Size | 36 x 22 x 3mm | - |
Antenna Interface | IPEX, stamp hole | - |
Communication Interface | UART, SPI | Software programming |
Package | SMD | - |
Electrical Parameters | Minimum | Typical | Maximum | Remarks |
Volt | 1.8V | 3.3V | 3.6V | |
PA Volt | 2.5V | 3.3V | 3.6V | |
Emission Current | 900mA | Instantaneous power consumption | ||
Receiving Current | 12mA | - | ||
Sleep current | 1uA | Software programming control | ||
Working Temperature | -30℃ | 75℃ | - |
Pin Definition
Download